Overview
This solar controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the controller conversion efficiency up to 99.9%.
①Heat Sink —dissipate controller heat
②Plastic Case —Internal protection
③LED & LCD — Display settings and operating status, system parameters
④Key: MENU、OK —Set and view the operating parameters
⑤Temperature Sensor Port —Collect temperature information,
⑥RJ11 interface —Connecting monitoring devices
⑦ Load Terminals —Connected load.
⑧Battery Terminals —Connect the battery.
⑨Solar module terminals —Connected solar modules.
| No. | OL-SOLAR60-48V | |
Battery Parameters | Max Charging Current | 60A |
System Voltage | 12/24/36/48V automatic recognition | |
MPPT Charging Voltage | before boost or equalization charging stage | |
Boost Voltage | 14~14.8/28~29.6/42~44.4/56~59.2V@25℃(default:14.5/29/43.5/58V) | |
Equalization Voltage | 14~15/28~30/42~45/56~60V@25℃ (default:14.8/29.6/44.4/59.2V)(Liquid, AGM) | |
Float Voltage | 13~14.5/26~29/39~43.5/52~58V@25℃(default:13.7/27.4/41.1/54.8V) | |
Low Volt. Disconnect | 10.8~11.8/21.6~23.6/32.4~35.4/43.2~47.2V (default:11.2/22.4/33.6/44.8V) | |
Reconnect Voltage | 11.4~12.8/22.8~25.6/34.2~38.4/45.6~51.2V(default:12/24/36/48V) | |
Overcharge Protect | 15.8/31.3/46.8/62.3V | |
Max volt on Bat. terminal | 65V | |
Temp. Compensation | -4.17mV/K per cell (Boost, Equalization)，-3.33mV/K per cell (Float) | |
Charging target voltage | 10.0~64.0V(Lithium, default: 29.4V) | |
Charging recovery Volt. | 9.2~63.8V(Lithium, default: 28.7V) | |
Low voltage disconnect | 9.0~60.0V(Lithium, default: 21.0V) | |
Low voltage reconnect | 9.6~62.0V(Lithium, default: 22.4V) | |
Battery Type | Gel, AGM, Liquid, Lithium（default: Gel) | |
Panel Parameters | Max volt on PV terminal | 150V(-20℃), 138V(25℃) *1 |
Max input power | 750/1500/2250/3000W | |
Day/Night threshold | 3.0~10.0/6.0~20.0/9.0~30.0/12.0~40.0V(Default: 8/16/24/32V) | |
MPPT tracking range | （Battery Voltage + 1.0V）~Voc*0.9 *2 | |
Load | Output Current | 30A |
Load mode | Always on, Street lamp, User-defind Mode(default: Always on) | |
System Parameters | Max tracking efficiency | >99.9% |
Max charge conversion | 98.0% | |
Dimensions | 262.5*186.5*97.5mm | |
Weight | 3Kg | |
Self consumption | ≤16mA (12V); ≤12mA (24/36/48V) | |
Communication | RS485(RJ11 interface) | |
Optional | IoT, BLE(Internal/External) | |
Grounding | Common Negative | |
Power terminals | 6AWG(16mm⊃2;) | |
Ambient temperature | -20 ~ +55℃ | |
Storage temperature | -25 ~ +80℃ | |
Ambient humidity | 0 ~ 100%RH | |
Protection degree | IP32 | |
Max Altitude | 4000m |
We strongly recommend connecting a fuse directly to the battery terminal to protect from any short circuit in the battery circuit. PV-modules generate current whenever light shines on them. The generated current is directly proportional to the light intensity. Even low levels of light, will deliver the PV-Modules no load, full voltage. It is thus utterly advisable to protect PV-modules from any incident light during installation; Never touch uninsulated cables (ends), only use electric insulated tools, and make sure that the wire cross section is adequate for the PV module operating currents. Connections must always be conducted in the sequence as described below.
Nanjing Oulu electric Corp., Ltd. is a global clean energy solution service provider and high-tech photovoltaic module manufacturer. We are committed to providing one-stop energy solutions including energy supply, energy management and energy storage to customers around the world. Our products Passed CE, TUV, ISO.UL certificate. Any questions please contact us freely.