Overview
FGS wind solar hybrid controller inverter is a versatile high-performance machine, the system is divided into wind and solar complementary control module, sine wave inverter control mode. The two modules are independent of each other, but also complement each other, while with RS485 communication. The user can monitor the platform through the company's products to monitor the work of the state control.
Type | FGS1000-48V | FGS2000-48V | FGS300048V | FGS400048V | FGS5000-48V | FGS6000-48V | ||
Battery rated voltage | 48VDC | |||||||
Wind turbine rated power | 600W | 1000W | 1000W | 1000W | 1500W | 1500W | ||
Solar panel rated power | 400W | 600W | 600W | 600W | 600W | 600W | ||
Max charge current | 33A | 43A | 48A | 54A | 60A | 75A | ||
Under voltage | 43.2VDC | |||||||
Under Voltage recover | 52.8VDC | |||||||
Over-voltage | 64.8VDC | |||||||
Over-voltage recover | 62.4VDC | |||||||
Rated output current | 3.6A | 7.3A | 10.9A | 14.5A | 18.2A | 21.8A | ||
Rated output power | 1000VA | 2000VA | 3000VA | 4000VA | 5000VA | 6000VA | ||
Impulse voltage range | <53.2VDC | |||||||
Straight voltage range | 53.2VDC<battery voltage<55.2VDC | |||||||
PWM voltage range | 55.2VDC<battery voltage<58.0VDC | |||||||
Loader voltage range | 55.2VDC<battery voltage<58.0VDC:PWM unload | |||||||
Output waveform | Pure sine wave | |||||||
Output frequency | 50.00Hz | |||||||
Inverter efficiency | >90% | |||||||
Output waveform | < 5.0% | |||||||
Overload protection | >110%rated current 1min’；>150%rated current 20S；>180%rated current 5s；>200%rated current 0S。 | |||||||
Environment | Temperature：-10℃~40℃； Humidity: <95% non-condensing; avoid direct sunlight | |||||||
Size | See Instructions | |||||||
Display Areas:
1. Charge control display: battery voltage, photovoltaic charging current, wind charging current, wind speed
Inverter control display: battery voltage, output voltage, output current, output power, output frequency
RS485 communication function
Users can use the host computer to monitor and control the working status of this product
Load adaptability,including capacity,inductive, mixed load
Input protection,input over-voltage protection, output over-current protection,output short-circuit protection,over-temperature protection
System Module:
1. wind and solar complementary control module
2. Sine wave inverter control module
The two modules independent of each other and complement each other
Nanjing oulu electric Corp., Ltd is a professional manufacturer of green energy products with great commitment, contribution heart, and responsibility. We are specialized in the R&D, manufacture, and sale of high-quality IGBT inverters, all kinds of pure sine wave inverter(off-grid and on-grid, single-phase and three-phase).
Package & Shipping
By sea , by air, and also BY express way.
1. How does a power inverter work?
A power inverter converts DC power into conventional AC power, when an AC outlet is not available. Simply connect an inverter to a battery source, plug your appliance into the inverter.
2. What is the difference between a modified sine inverter and pure sine wave inverter?
Modified sine wave power inverter is more portable than pure sine wave power inverter, lighter, and lower in cost. If the device handles voltage fluctuations, a modified sine wave inverter should be considered.Most devices that people typically wish to power will work fine with a modified sine wave inverter.
Pure sine wave power inverter allows motors to run cooler, last longer and provide very clean power that is same quality with State Grid . Devices such as air conditioner, Freezer and most medical equipment require a pure sine wave inverter to run.
3. What type of batteries do you recommend?
Most of people choose to use deep cycle marine batteries with their inverters. Also can use Acid battery, Lithium battery.